Metaeye SV ( single Video)

Use your home TV & phone to get into the world of Visual Communication ! Metaeye Sv is the affordable solution for Simple Remote Surveillance and Videoconferencing that uses H.324 standard ....

	Simple Remote Surveillance
	Affordable Videoconferencing

When use in conjuntion with the MetaEye EA , it allows to control the 4 cameras on the remote site.

	It's all you need for Remote surveillance - MetaEye SV has one video input ready for any NTSC or PAL source of video. It comes with a built-in high quality digital camera, a high speed modem and a state-of-the-art audio/video hardware codec. That's right ! They are all packed into a single compact videophone box, remote surveillance box!
	Easy Installation - When you unpack MetaEye SV, all you need to do is to plug in the power cord, TV cable, phone line, phone set and any color camera . Then, you are ready to get connected, visually, to anyone in the world who has an H.324 standard Videophone system.
	Getting Started - The operation of MetaEye SV is incredibly easy and intuitive. Just place a regular phone call. After the destination answers the phone, press two buttons on the telephone keypad and the video conferencing is up and running.

You can also use the MetaEye SV with MetaEye EA and MetaEye LCD ...check the different configurations

Key features

* Stand alone TV based Videophone
* Fully H.324 videophone standard compliant.

* Fully compatible with MetaEye LCD , MetaEye TM and MetaEye EA
* Use TV as display screen
* Full screen/quarter screen display selectable
* Auto Answering - MetaEye SV can pick up the incoming calls after specified number of rings with password protection This allows you to oversee the remote site efficiently.
* Camera Control - You have remote control over camera functions including zoom, pan, tilt, freeze, focus and private.
* Video selectable up to VHS quality
* Simultaneously display remote and local video
* Easy to operate On-Screen-Display menu
* Up to 15 frames per second high quality video
* Echo-free and no delay high quality audio
* Built-in high speed modem
* Provide an additional A/V terminal for video tape recorder
* All operations are through telephone keypad
* Privacy mode features supported
* Affordable price for home users

Working with MetaEye AE Autodialing Function

You can place Metaeye SV at the security center and make it work with MetaEye AE. The Autodialing* function enables MetaEye AE (at Site #1, see diagram below) to automatically dial out two different phone numbers and reach security centers, you can set up an ID (8-digit) at each remote site for the security center to identify the call-from site.

An alarm event starts with a pulse** generated by Sensor, MetaEye AE at Site #1 is triggered and it will alternate dialing between Center A and B before a successful connection. You can manually change (through the user interface on the screen) the status of DO#1 output port from open-circuited to close-circuited as the signal to reset the alarm system and end the event.

* Available with version 2.1 firmware/hardware or above
** 9 - 24 VDC required, must be latched at high level before the event ends

You can also Use the MetaEye SV to control the MetaEye EA I/O ports.

	2 Inputs ports
	2 Output ports

System Requirement

TV (with A/V input recommended), Telephone line, Telephone set (Cordless recommended), Ccd color Camera or any other video source.